ACRYLIC HANGING

Tools you will need: Phillips head screw driver, Drill and ¼” Drill Bit, Pencil, and Level.

1. Remove the standoffs and hardware from the packaging. Package includes four steel standoffs, and two screws and wall anchors. Screws are only required in the top two standoffs.
2. Install standoffs in the bottom two holes of the acrylic.
3. Hold the acrylic on the wall in position using a level. Use a pencil to mark the location of the top holes.
4. Drill holes on the marked locations and install the wall anchors.
5. Insert screws through standoff bases and tighten.
6. Align the top two holes in the acrylic over the standoff bases. Tighten by hand the standoff caps into the standoff bases.